+86 13902971377
Contact Us
Fill out the quick form with detailed information and you can get the best design solution for

Company News

High-end jewelry store display cabinet production process standards!

Source:凡路珠宝展柜厂    Author:凡路珠宝展柜厂    Visit:228    Pubtime:2018-09-26 17:32:21
High-end jewelry store showcase production process standards, jewelry showcase is an indispensable important item in the shopping mall, then what problems should we pay attention to when making our showcases? What are the standards of our showcases? Take a look at it.

The display cabinets of high-end jewelry stores must pay special attention to quality and safety. Therefore, in the decoration design of general jewelry stores, the showcases will play a big role in the display effect. Ordinary consumers can check the inner quality of the jewelry display cabinet from the following aspects when purchasing a jewelry cabinet, or after the jewelry cabinet is delivered to the store to install the jewelry cabinet:

One: the strength of the slide of the high-density board, the drawer or the keyboard support, and the firmness of the jewelry cabinet after installation. The high-density board edge-sealing quality is a relatively important quality indicator for high-density board jewellery cabinets. The exposed parts of the parts must be edge-sealed, the edges should be tight and flat, and the degumming and surface are not allowed. There are glue stains.
The purpose of edge sealing can reduce the amount of formaldehyde released from high density boards and increase the moisture resistance of high density boards. If the edge banding is not flat, it means that the inner edge of the material is wet for a period of time, and the edge banding is easy to fall off. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The jewellery cabinet with the plywood bag is nailed with nails. Pay attention to whether the nail holes are flat and the color of the nail holes is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it will not work. Slowly, the putty will fall out from the inside. When inspecting the edge seal, the hidden parts of the jewelry cabinet should be inspected, such as the rear end face and bottom of the drawer side panel, and the side of the shelf.



Two: The firmness of the jewelry cabinet after installation is also related to whether the jewelry cabinet is qualified - an important indicator. The inspection method is that after the jewelry cabinet is installed, the jewelry cabinet is shaken by hand, and the jewelry cabinet cannot have obvious shaking. There are two aspects of shaking, one is the shaking caused by the uneven feet; the other is the shaking caused by the jewel cabinet installation or structural design problems. If the foot shaking exceeds 2mm, it means that the processing precision of the jewelry cabinet is problematic; after the jewelry cabinet is installed, the highest point shaking due to structural problems exceeds 15mm, indicating that there is a quality problem in the installation or structural design of the jewelry cabinet.

Third: When receiving the jewelry cabinet, the consumer should ask for the jewelry cabinet instruction manual, the certificate of conformity, and check whether the instruction manual corresponds to the jewelry cabinet corresponding to the instruction manual and the certificate of conformity, and whether the manufacturer provides the same name as the merchant provided when purchasing the jewelry cabinet. Whether there is a manufacturer's address and contact telephone instruction manual whether the jewellery cabinet's implementation standards, materials, model specifications, production date, installation and use precautions, maintenance methods, general troubleshooting, etc. are explained.



Four: The slideway strength of the drawer or keyboard tray is a basic item indicator of the jewelry cabinet. The national standard detection method is to pull the limited drawer or keyboard tray to the maximum position, and the drawer or keyboard without the limit is pulled to the limit. The full-length 2/3 position, at the top of the center of the drawer panel or keyboard tray, is 350N, pressing lO. If the slide is deformed or peeled off, the jewelry cabinet is considered unqualified. When checking the indicator, the consumer can pull the drawer or the keyboard tray as required, and press the drawer panel or the keyboard support panel by hand. If the slide is relatively inferior, the quality may be unqualified. For these indicators and processes, the general showcase factory can not be customized, and the focus on the showcase factory can be better for everyone to make, to be responsible for the customer, for the customer's showcase production, better to carry out a good design And high quality production services.

The introduction of the craftsmanship standards for high-end jewelry stores is here, and the Van Jewelry Showcase is looking forward to working with you.
Hot Sale
Latest News
COMPANY INFOMATION
Contact us

Mobile Phone: +86 13902971377

Email: sale@ssfunroad.com

Contact Us Now