Why are the good jewelry display cabinets expensive?

Show ark raw material is different

The same equipment is produced in the same process. Why is the display cabinet quality distinct?The so-called rottenness cannot be carved, the raw material used is the first to influence the display cabinet quality.

1. The choice of wood

For example, good wooden display cabinets are used in high density, smooth and smooth surface, high environmental protection coefficient, low formaldehyde emission, and the use of E0 formaldehyde emission is less than or equal to 0.5 mg/L, etc., of course, some high-grade cases and also use solid wood materials, including shen Yang cases and do some of the recent case of hotel bedside table, bofeng lotus supermarket wine using solid wood material such as spray varnish, cooperate with the texture and the original real wood material is fine.

2. The choice of hardware accessories

Good use of 304 stainless steel hardware fittings, surface smooth level off, the welding mark is very low, based on the display case in hardware fittings on the widely used frequently, every road under factory spontaneous production and quality standards have strict requirements for hardware fittings.

3. Glass selection

Beautiful with high degrees of cases to use ultra toughened glass, not easy to break, in the case of accidental break is not easy to produce glass beads, are much better than common glass on security, some cases to clothing store window also used acrylic material.

4. Selection of other raw materials such as paint

In general, environmentally friendly paint smells mild, elegant and pure;When the paint is opened, it gives off a strong pungent smell or other odour.At present some of the inferior lacquer also has aroma, but like inferior perfume is same, the smell is not used.The environment-friendly paints are made of imported raw materials, and the bright colors are white and crystal clear.It is semi-transparent and opaque, no red, black and precipitate, with a national standard inspection report and corresponding certificate.Other materials such as electric wire, lamps and lanterns through national certification.

5. The production line is different

Good display cabinets have more advanced, fully automated, modern production lines. Ordinary factories are semi-automatic production lines operated by workers.The quality of the display cabinet is lean production and control, only the most advanced production line can produce the best quality products, the good equipment good production line is the guarantee for the production of good products.

1. Edge sealing machine

Good sealing side machine can perfect linear sealing side trimming, etc., can be a one-time with two-sided glue sealing sideband cut sealing sideband bonding pressure, neck, chamfering, coarse and fine trim edge polishing function, sealing side is fine and smooth, feel is good, flat wire sealing body is smooth.

2. Driving machine

The good opening machine can be perfect according to the drawing process requirements and the size specification machine will be neatly cut into the required size of the original plate

3. CNC woodworking engraving machine

Woodworking engraving machine is widely used in woodworking industry, the three-dimensional wave board processing, cabinet door, solid wood doors, craft wooden door, wenqi door, folding screen, process window processing, shoe polisher, console cabinets and panel, mahjong table, computer desk and auxiliary panel furniture products processing.Good woodworking engraving machine carving 1mm Chinese characters from the precision small size machine, or large engraving machine engraved 1.5mm small words, under the magnifying glass must see very clearly.The application of SAJ inverter in woodworking engraver is characterized by:

1. Low frequency torque and stable output

2. High performance vector control

3. Fast dynamic response and high steady speed

4. Slow down the stop speed

5. Strong anti-interference ability

4. Profile cutting machine

The cutting machine can be cut by 45 degrees or polygons, using the worktable straight motion, the edge of the cut is smooth without the edges, the gap is not broken, and it is not tie-in.

The packing is different

The display cabinet installation is the last work of the display cabinet. No problems can be found.Check all props before and after the installation to ensure that all props are of no problem size.The packaging of the display case is also important to ensure that the display case will not be damaged or damaged during handling, and the surface cannot be scratched.

The factory proposal of shenzhen fan road display cabinet:

According to the actual situation for their configuration under appropriate cost is a way to control its costs, but not blindly pursue cheap product cases, good cases to display is the first step to store sales success, believe that everyone still approved.

This article is provided by the direct selling manufacturer of all road jewelry display cabinets: 20 years of experience in display cabinet design for jewelry stores, which will help you to improve your brand value quickly.