The selection of the road rail for jewelry display cases
The way of jewelry display ark is a small detail in the design of jewelry display ark, of course we can't ignore it.Now, please follow me to find out the track of the display on the market.
1. Rail material: iron (du - zinc, paint), copper and other alloys.
Two, type and specification: two - track, three - track, rebound rail and so on.
3. Basic working principle: to achieve scale by rolling the ball (or roller) between the track and the track.
4. The selection factor: one of the important factors that should be attached to the selection of the roadway of the display case is the proportion, the second is the surface treatment, the third is the structure and the material, and the fourth is the applicability.
1. Gravity: usually refers to the weight of the same length or unit of volume, which refers to the weight of the rail track of the same type (such as two rails).
Surface treatment: this can be seen with the naked eye.,
3. Structure and material: look at the cross-section thickness of metal material in the track of the display case, and its structure, which usually USES a lot of plastic parts for the rail quality of the display case than the whole metal display.
4. Applicability: the weight, strength and so on can be felt by stretching the rail.
5. Common two kinds of display case rail.
1. The road rail of the todi wheel.
Purpose: used for display drawer.
Length: 250~ 1000MM.
Weight: 20Kg~ 100Kg.
Type: partial pull out and (three sections) full pull out, the bottom wheel type booth installation.
2. Ball rolling booth rail.
Purpose: it is used for drawer and drawer.
Length: 150~800MM (even above).
Load bearing: 10Kg~100Kg above.
Type: generally with three - section rail ball rolling container rail installation.
This article is provided by the direct selling manufacturer of all road jewelry display cabinets: 20 years of experience in display cabinet design for jewelry stores, which will help you to improve your brand value quickly.