Paint daub is the final process of the display case of the watch. It is the final part of the display cabinet. The following is the painting process of the watch display cabinet made by the shenzhen fan road show cabinet.
1. Batch ash: first, the nail eye of the woodworking section should be filled with the atomic grey, and the joint slot and other depressions of the cabinet, such as too large, should be returned to the woodworking section for technical processing;When the atom ash is dry, use pig blood ash to fill the cabinet body, must not have omission.
2. Primer: the whole cabinet is painted with white primer by hand, so that the cabinet is isolated from the outside world, and there is a moisture-proof and avoiding "cabinet eating paint" phenomenon, which can guarantee the finishing coat to be more lustrous and full.
3. Polishing: when the paint is dry, enter the grinding, and then use the 240# sandpaper to smooth the tank.
4, black paint: cabinet surface exposed portion using manual spraying black paint, paint master technique has good operation level, paint room to ensure clean and isolation with the outside world, make the cabinet without sagging, particles, uniform surface luster, feel is good, and so on.
The above is the paint daub process of the watch display cabinet that I introduced to you, hope to be helpful to you.